Instructions / Assembly

STEP 4

• Before filling tank with sand, place nub on bottom

of tank into notched out piece of the base, twist to

the right till snug.

NOTE

Sand should be filled no less than 1/2 way up the tank and no more

than 3/4. Over-filling will result in permanent damage to your

Filter System.

• Add filter grade sand (sold separately) to

filter tank around standpipe.

12” Tank ...... 50 Lbs.

• Remove plastic protector and fill tank with water until the tank is filled right below

opening of standpipe.

NOTE

NEVER FILL SAND TANK MORE THAN 1/2 TO 3/4 OF THE WAY.

Adding too much sand can cause weak return flow.

• Place standpipe inside the filter, cover standpipe

with the round plastic standpipe protector to

prevent sand from entering standpipe.