Installation Guide

STEP 2
• Slide 1 of the 4 ladder steps onto one of the
stainless steel handrails. See figure 1
• Make sure that the step treads are facing up.
• If you have any difficulty sliding the step onto the
handrail apply a small amount of oil to the hand-
rail.
• Align the holes in the step with the top set of holes
on the handrail.
• Secure step to handrail with a bolt and nut. Make
sure that the head of the bolt is located on the
outside of the step.
See figure 2
• Slide the second handrail thru the hole on the opposite side
of the step. Secure with a nut and bolt. See figure 2
• Slide the remaining 3 steps onto the handrails and secure
them with nuts and bolts. See figure 3
Figure 1
Figure 3
Figure 2