Owners manual

STEP 6
6
Slide Upper Brace (J) over Small Barrier
as shown.
Slide Upper Brace (J) through the groove in the
Large Barrier and push down lightly to secure.
Place the Lower Base (K) on a level surface.
Snap Large Barrier (H) into the groove on the
lower base facing round edge.
Snap Small Barrier (I) into the groove on the
lower base facing the straight side.
Screw Lower Base of Entrapment Barrier into bottom
step of the Inside Portion of the Ladder with
(2) 10 x 1-1/4” screws. (This is the side WITHOUT
FLIP UP STEPS!)