Owners manual

10
STEP 10 CONT.
STEP 11
• Center locking cap (F) over opening on side of
handrail where platform was just attached. Using a
rubber mallet or a hammer and a small piece of
wood, tap on cap until the cap is flush with the
Handrail
• Repeat for each of the remaining (3) locking caps.
• Coat the tops of the legs with Blue Seal O-Ring
Lube or liquid soap and attach handrails by
pushing them down over the legs.
• Secure all handrails (G) to the legs with
(4) #10 1-1/4” screws through each of the
pre-marked openings.