Owners manual

• Screw Upper Brace of Entrapment Barrier into the

third step of the Inside Portion of the Ladder with

(2) 10 x 1-1/4” screws.

(This is the side WITHOUT FLIP UP STEPS!)

STEP 7

STEP 6 CONT.

FOR 52” POOLS CONTINUE WITH STEP 7

FOR 48” POOLS SKIP TO STEP # 8

FOR 54” POOLS SKIP TO STEP # 9

FOR 52” POOLS, CUT HANDRAIL

AT THIS FIRST LINE

• This ladder is designed to fit multiple

pool heights. ONLY FOLLOW THIS

STEP IF YOUR POOL HEIGHT IS 52”.

• Locate the first line on the Handrail (G)

of the ladder.

• Using a hacksaw cut the Handrail evenly

through both sides.

52” POOLS