Owners manual

STEP 6
6
• Slide Upper Brace (J) over Small Barrier
as shown.
• Slide Upper Brace (J) through the groove in the
Large Barrier and push down lightly to secure.
• Place the Lower Base (K) on a level surface.
• Snap Large Barrier (H) into the groove on the
lower base facing round edge.
• Snap Small Barrier (I) into the groove on the
lower base facing the straight side.
• Screw Lower Base of Entrapment Barrier into bottom
step of the Inside Portion of the Ladder with
(2) 10 x 1-1/4” screws. (This is the side WITHOUT
FLIP UP STEPS!)