Owners manual

STEP 10 CONT.

STEP 11

• Center locking cap (F) over opening on side of

handrail where platform was just attached. Using a

rubber mallet or a hammer and a small piece of

wood, tap on cap until the cap is flush with the

Handrail

• Repeat for each of the remaining (3) locking caps.

• Coat the tops of the legs with Blue Seal O-Ring

Lube or liquid soap and attach handrails by

pushing them down over the legs.

• Secure all handrails (G) to the legs with

(4) #10 1-1/4” screws through each of the

pre-marked openings.