Owners manual

• This Ladder is designed to fit multiple pool

heights. ONLY FOLLOW THIS STEP

IF YOUR POOL HEIGHT IS 48”.

• Locate the leg (E) on both sides of

the ladder.

• Find the lines located at the top of the legs.

• Using a hacksaw cut both legs evenly

along the line.

FOR 48” POOLS, CUT ALL FOUR

LEGS AT THIS LINE

• Using a funnel fill both legs with sand. Use

approximately 20 Lbs. of sand in each leg.

FILL LEGS WITH SAND

USING A FUNNEL

STEP 5

• Screw Upper Brace of Entrapment Barrier into the

third step of the Inside Portion of the Ladder with

(2) 10 x 1-1/4” screws

STEP 3 CONT.

STEP 4

NOTE

Only follow this step if using as an

In Pool Ladder