Use and Care Manual

5
STEP 5
• Place ladder in your desired position on
deck (A). Swivel step if needed to align
with pool floor. Make sure the base step
rests flat against the pool floor. (B)
• Mark the location of the handrails on the
deck with a pencil. Using a 1 ½” hole saw,
drill one hole for each hand rail through the
deck surface (c). This will ensure that the
deck will now support the ladder.
• Secure hand rails to the deck using deck
flanges (D).
• Slide the flanges over each handrail. Insert
the handrails through the holes in the deck.
Secure the flanges to the deck with screws.
Secure the flanges to the handrail by
tightening down the screw in the flanges.
A
B
C
D