Operating Guide

#2: Lay one of the side panels down on a
clean flat surface. Starting with the bottom riser
place the two tabs located on end of riser into
the two slots located in the side panel and
push down until seated. The air vent holes
located on top edge of riser must face
upwards.
#1: Using a funnel pour 25 lbs of dry play
sand into each side panel. Shake the panel to
settle sand to the bottom. Cap the fill holes
using two white push plugs from the hardware
bag.
OCEAN BLUE POOL STEP
For Flat Bottom Pools -
MODEL 400600 (30” ) & MODEL 400650 (38” ) STEP
ASSEMBLY INSTRUCTIONS - PLEASE READ BEFORE ATTEMPTING ASSEMBLY
STEP ASSEMBLY:
Tools Needed for Assembly
Cordless drill with Phillips head 1/4" Drill Bit
Rubber Mallet 7/16" Wrench
Phillips Screwdriver Pliers
50 LBS. SAND REQUIRED
QTY PART DESCRIPTION
NUMBER
2 - 490600 side panel
4 - 490601 30" step riser [model 400600]
4 - 490611 38" step riser [model 400650]
2 - 490602 30" step tread [model 400600]
2 - 490612 38" step tread [model 400650]
2 - 490603 30" locating tread [model 400600]
2 - 490613 38" locating tread [model 400650]
2 - 490604 short post
2 - 490605 long post
2 - 490606 handrail
4 - 490607 foot pads
2 - 490609 deck connectors
1 - 490610 step hardware/safety pack includes:
2 - white plugs
2 - safety labels
8 - 1/4" x 20 x 2-1/2” bolts
8 - 1/4" x 20 hex nuts
8 - 1/4" x 20 plastic acorn nuts
12 - #10 x 1-1/4" self tapping screws
Step
Tread
Side
Panel
Long
Post
Short
Post
Deck
Connector
Handrail
Riser
Foot
Pad
Locating
Tread
SAND
Pour
sand into
funnel.
Air Vent
Holes
prpd.RG-OB-Steps-USr10:Layout 1 12/16/10 9:15 AM Page 2