Instructions / Assembly

No Diving or Jumping. Observe all Safety Rules

1-23

GENERAL INSTRUCTIONS - YARDMORE OVAL POOLS

GROUND PREPARATION

Secon

f. Once these pieces are in place, screw the left and

right gussets to each other using three #10 screws.

(Image 16)

g. In order to ensure that the steel upright and the

channels are at right angles during the assembly,

push the ends of the steel upright and the channels

and tighten the bolts at the same time. First,

tighten the bolts of the channels by maintaining a

good pressure. For the screws on the steel upright

and gussets, sufficiently tighten the bolts to let the

screws exceed 1/8“. (Images 17 & 18)

C. CONT. PRE-ASSEMBLY OF THE STRAIGHT SECTION