Instructions / Assembly

4-2 No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL FRAME
Secon
4
B. INSTALLATION OF TOP LEDGES AND LEDGE COVERS
1. Install stabilizers
a. Install the stabilizers on the wall while ensuring to
leave a gap between each end. (Image 2)
2. Install top plates and top ledges
a. Install the top plate on the upright and secure with
three screws. (Images 3 & 4)
b. Secure the top plate with 3/4 inch screws. (Image 6)
c. Insertpartially with 3/4 inch screws on top. Evenly
distribute the space between the top ledges to
center them between the uprights.
Important Note:
Ensure to leave a gap between the two stabilizers.
See Diagram:
Please refer to your pool’s footprint (Section 1, last page)
for gap measurement.
2
3
4