Instructions / Assembly

No Diving or Jumping. Observe all Safety Rules.
a. Place concrete patio stones at the
base of each upright of your pool.
Patio stones 12 ” (30 cm) or larger
will do. Round patio stones will also
work.
b. Temporarily lay out the bottom rails
and bottom plates around the circle.
Each bottom plate will show the
location for a patio stone. Make a
mark in the ground at each base
plate . (Image 14)
c. Remove the bottom rails and base
plates and lay out the patio stones
around the circle where the base
plates were. (Image 15)
d. The patio stones must be sunk into
the ground so the tops are flush with
the soil around them. Use the
carpenter ’ s level to make sure the
patio stones are perfectly level and
flush with the ground. Use the
carpenter ’ s level and a 2 - by - 4 (5cm x
10cm) wood plank between patio
stones to make sure the stones are
level with each other. (Image 16)
8
14
15
16
4. Patio Stones
CONT. C. PREPARE THE FOUNDATION OF YOUR POOL
5. Proceed to Section 2