Instructions / Assembly

No Diving or Jumping. Observe all Safety Rules.
A. INTRODUCTION TO INSTALLING YOUR POOL
Read all instructions completely before you begin.
These instructions explain how to install your pool. Simply foll ow the step - by - step
directions. Start with this part, SECTION 1 and use the other instructions,
SECTION 2 to put together your entire pool.
SECTION 3 also has Safety Rules and instructions to help you keep your pool
clean and in good shape, year after year. Be sure to read the Safety Rules , and
make sure everyone who uses your pool reads and understands them .
1. The Terrain
Pay special attention to choosing the right
location for your pool:
• Choose a large area, as flat and level as
possible and well drained. (Image 1)
• Choose a spot on dry, firm earth
(stabilizer or other) — do not install the
pool on asphalt, tar paper, sand,
gravel, peat moss, wood or chemically
treated soil.
• Check with your pool dealer to see if Nut
Grass grows in your area. This type of
grass may grow up through your pool
liner. Your dealer will be able to advise
how best to treat the site.
• Sloped areas will need to be made level
by digging away high spots, not by
filling low spots — be prepared to hire
earth - moving equipment if necessary.
(Image 2)
B. DETERMINE THE LOCATION OF YOUR POOL
Important
Note:
3
1
2
Ground
preparation is
one of the
most
important
steps in the
installation
process.
A proper
foundation
will ensure the
rest of the
pool assembly
goes smoothly
and that no
problems will
occur when
the pool is
filled with
water.