Instructions / Assembly

OPERATION INSTRUCTIONS (CONTINUED)
4. Remove the anti-entrapment screen from the water intake fitting on the pool wall.
NOTE: Figure 1 shows the intake for soft-side frame pools. Figure 2 displays the intake used with our
speed set pools.
5. Insert the Vacuum Hose Adapter (Not Included)
6. Place the Base Vacuum Head in the pool. Be careful not to damage the liner. Slowly
move the vacuum over the pool floor.
7. Dirt and debris will be vacuumed directly into the filter tank. Clean out the filter tank as
necessary.
8. This concludes the instructions for cleaning with the Base Vacuum Head.
Figure 1
Figure 2