SKU# NBP6158 BLUE WAVE POOL MAINTENANCE KIT INSTRUCTION MANUAL Questions, problems, missing parts? Before returning to your retailer, call our Consumer Hotline at 1-800-759-0977, Monday – Friday.
THANK YOU! Thank you for purchasing this product. We work around the clock and around the globe to ensure that our products maintain the highest possible quality. However, in the rare case of issues during assembly or use of this product, please contact our Consumer Hotline at 800-759-0977 for immediate assistance before contacting your retailer. Please read the warranty information at the back of these assembly instructions for further details.
PARTS LIST & DIAGRAMS 1. Base Vacuum Head 4. Telescopic Pole # Part Description 1 (NOT TO SCALE) 2.. Hand Skimmer Net 5. Venturi Vacuum with Bag 3.. 5/8” Garden Hose Connector 6. 1.25" Vacuum Hose Adaptor QTY> MFG No. BW No. Base Vacuum Head 1 JV02BU01 NBP6158 2 Hand Skimmer Net 1 LS1310PE NBP6158 3 5/8” Garden Hose Connector 1 SP07 NUP1004 4 Telescopic Pole 1 TP3 NBP6158 5 Venturi Vacuum with Bag 1 JV02BU03 NBP6158 6 1.
OPERATION INSTRUCTIONS Cleaning with the Hand Skimmer 1. Extend the telescopic pole to its longest length. 2. Attach the hand skimmer to the open end of the telescopic pole. 3. Scoop out leaves or any debris in the pool. Vacuuming with a 5/8” Garden Hose (Not Included) 1. Extend the Telescopic Pole to its fullest length. 3. Attach the Venturi vacuum bag to the Base Vacuum Head. Then tighten the draw string and tie a knot to secure it in place.
OPERATION INSTRUCTIONS 6. Turn on the water supply. This will cause a venturi suction at the vacuum head. Debris is collected in the vacuum bag. 7. Carefully, and slowly push the Vacuum Head across the pool floor to remove debris. Do not press hard on the liner as this may cause damage. 8. When done or when the bag is full: a) Slowly move the vacuum head to the side wall of the pool, turn the vacuum head upside-down, shut off the water, and remove the vacuum head from the pool. 9.
OPERATION INSTRUCTIONS (CONTINUED) 4. Remove the anti-entrapment screen from the water intake fitting on the pool wall. NOTE: Figure 1 shows the intake for soft-side frame pools. Figure 2 displays the intake used with our speed set pools. Figure 1 Figure 2 5. Insert the Vacuum Hose Adapter (Not Included) 6. Place the Base Vacuum Head in the pool. Be careful not to damage the liner. Slowly move the vacuum over the pool floor. 7. Dirt and debris will be vacuumed directly into the filter tank.
90-DAY LIMITED WARRANTY This product is warranted to the original purchaser to be free from defects in material or workmanship for a period of ninety (90) days from the date of the original retail purchase. This warranty does not cover defects or damage due to improper installation, alteration, accident, or any other event beyond the control of the manufacturer. Defects or damage resulting from misuse, abuse, or negligence will void this warranty.
MERCI! Nous vous remercions d’avoir acheté ce produit. Nous travaillons 24 heures sur 24 et dans le monde entier pour nous assurer la meilleure qualité possible de nos produits. Cependant, dans les rares cas de problèmes lors de l'assemblage ou de l'utilisation de ce produit, veuillez contacter notre service d'assistance téléphonique aux consommateurs au 800-759-0977 pour une assistance immédiate avant de contacter votre détaillant.
INSTRUCTIONS D’UTILISATION Nettoyer avec le filet à feuilles 1. Déployez la perche télescopique à sa plus grande longueur. 2. Fixez le filet à feuilles à l'extrémité ouverte de la perche télescopique. 3. Retirez les feuilles ou les débris de la piscine. Pour passer l'aspirateur avec un tuyau d'arrosage de 5/8 po (non inclus) 1. Déployez la perche télescopique à sa longueur maximale. 2. Fixez la tête d'aspiration à l'extrémité ouverte de la perche télescopique. 3.
INSTRUCTIONS D’UTILISATION 6. Ouvrez l'alimentation en eau. Cela provoquera une action venturi au niveau de la tête d'aspiration pour collecter les débris dans le sac d'aspirateur. 7. Poussez lentement la tête d'aspiration sur le fond de la piscine pour enlever les débris. 10. Une fois terminé ou lorsque le sac est plein : a) Déplacez lentement la tête d'aspiration vers la paroi latérale de la piscine, retournez la tête d'aspiration, coupez l'eau et retirez la tête d'aspiration de la piscine. 9.