Installation Guide

3
PARTS FOR SAND FILTER (NOT TO SCALE)
A. FILTER TANKA. FILTER TANK
B. BASE C. 6-WAY VALVE
D. CLOSURE CLAMPS E. STANDPIPE F. LATERALS G. VALVE O-RING
H. HOSE CLAMPS I. PRESSURE GAUGE J. STRAIGHT FITTING (3) K. TEFLON
TM
TAPE
L. 3’ 1-1/2” HOSE M. 6’ 1-1/2” HOSE N. DRAIN CAP O. SIGHT GLASS
NE6150 & NE6170
NOTICE
SHOWN ABOVE ARE THE PARTS INCLUDED WITH AN 18” FILTRATION SYSTEM. SOME
OF YOUR PARTS MAY NOT BE THE EXACT SAME IF YOU HAVE A DIFFERENT SIZED
FILTRATION SYSTEM.
REV. 1/22