Use and Care Manual

~ over ~
(ENGLISH)
INSTRUCTIONS
1. Ensure that your light xture is a 110 VAC to 120 VAC xture. This LED Lamp will NOT work in 12 VDC
xtures, and may damage both the LED Lamp and the xture
2. Uninstall/disassemble, install the LED Lamp, and reassemble/reinstall per lamp xture
manufacturer’s instructions.
NOTE: GAME is not liable for damages to the light xture or LED Lamp which result from
damaged or improperly assembled light xtures.
MODEL COLOR SPECIFICATION
20 WATT Single Color LED Quantity: 48PCS * SMD5730 LED Chip
White Body Material: Aluminium + Frosted PC cover
Size: 177mm(diameter) x 105mm(height)
C/T: w.w.-3000~3500k, p.w.-6000~7000k, c.w.-8000~12000k
Voltage (V): AC 100-240V Frequency: 50~60Hz
Wattage (W): 21±1W
Luminous Flux (Lm): White 1200±10%Lm
Beam angle: 120°
Base: E27
Consult a licensed or certied electrician or a qualied pool serviceman in
accordance with the National Electrical Code and all applicable local codes
and ordinances. Improper installation will create an electrical hazard which
could result in death or serious injury to pool users, installers or others due to
electrical shock, and may also cause damage to property. Always disconnect
the power to the pool light at the circuit breaker before servicing the light.
Failure to do so could result in death or serious injury to serviceman, pool
users or others due to electrical shock.
DANGER! Risk of Electrical Shock or Electrocution!
INSTRUCTIONS FOR LED IN-GROUND POOL LIGHT (MODEL 3599)

Summary of content (2 pages)