Installation Guide

FIG 3
STEP #4
To Install/Replace batteries. Remove ALL 4 screws which secure the
battery
cover. Be careful not to lose any of the screws. When the 6 Long
Life Alkaline D Cell 1.5V batteries are installed (not included), the
alarm will
have two beeps and it is very loud! To ease installation, place
the switch to SWIM mode,
the alarm will sound in one long burst to signify
that it is in swim mode. The
WHITE LED will flash at each interval of 20
seconds
. The alarm is on but will not sound and can be handled for 3
minutes without the siren soundin
g. FIG 3