Installation Guide

Drop the bottles into the pool from a height of 4.5 inches. The alarm should sound. Use
the string to retrieve the bottles. Test the alarm weekly to insure maximum protection.
Using the Alarm
This pool alarm is designed to protect the pool at all times. To swim in the
pool, the alarm must be set to SWIM mode. An adult must move the
switches to the SWIM/ON position.
TESTING THE UNIT
The unit MUST be tested.
To test the alarm, you can make a simple device that will simulate the size
and weight of a young child. See Fig
8 and Fig 9. The materials needed are:
• 4 X 1.5 liter water bottles.
• Duct tape
• 6 ft of strong string
Fill the four bottles with water.
Use the duct tape to strap all 4 of the bottles together.
Tie the string tightly to one of the bottles.