Installation Guide
STEP #8
Turn the return jets from the pools filtration system down towards the
bot
tom of the pool. This will not affect the pool circulation; in fact it will
help conserve chemical consumption. This is required in order to maintain
the tightest security level possible using this alarm. See Fig 7. Water features
such as waterfalls, automatic c
leaners or pump cycling may affect alarm
reliability causing false alarms. If your alarm alerts due to water features,
simply turn the water feature off when the pool is not in use. If you have any
questions refer to the manufacturers contact information
Installation is now complete.
To help reduce false alarms, your AC 50032 Pool Watch alarm is equipped
with âFalse Alarm Resistantâ technology. Your alarm
will constantly
monitor the water and detect outside interference from conditions such as
wind and
automatic cleaners and compensate for them without
compromising alarm safety.
When entering into this FAR mode, after the GREEN LED light has been on
for a constant 6 seconds, the alarm will beep for 1 second. After that the
LED will flash each 2 seconds
.
After any 5 minute period without detecting wind or automatic cleaner
movement the alarm will automatically revert to normal armed mode
.
The alarm can also be taken out
of the FAR mode by moving the switch as
below.
From:
Reset to Swim to Reset