Top Rail Instructions

Put smaller cover to inside of joint, vartical.

Put #12 Sheet Metal Screw then tighten up.

Put larger cover to outside of joint, vertical and

slide into smaller cover.

Put #12 Sheet Metal Screw to Lower hole of

side of vertical as shown. do the same on the

other side of verticals.

Note: left side of Top seat on the figure not

shown for easy understanding, but actually top

seat should be attached before this procedure.

d ) INSTALLING SEAT COVERS

e ) INSTALLING OVAL SIDE TOP SEAT AND

SIDE SEAT COVERS

P.No.0341

#12 Sheet Metal Screw

Use #12 Sheet Metal Screw to Install oval side top

seats on top of Resin side upper joint P.No.3177.

Cut two prong of inside of side seat cover as shown

in the figure, then attach side seat cover by placing

it from inside of pool in right position as shown in

the figure.

Put #12 Sheet Metal Screw to side seat cover and

tighten it up. Put seat cover cap on top of side seat

cover.

FOR OVAL POOL ONLY

3/4