Owner's manual

ASSEMBLY INSTRUCTIONS (CONT.)
4. Attach each LEG BRACE #5 to LEGS as shown with SMALL BOLT #8 and SMALL FLAT
WASHER #9. Feed wire leads through gasket, and carefully turn table over.
5. Attach ELECTRONIC SCORER #11 with SCREW #16.
6
* Before turning the
table over, carefully
feed two wire leads
through gasket hole
in center of side panel.
Carefully attach 2 wire leads to
ELECTRONIC SCORER #11.
Insert the lead “ A ”
into the “ A ” receptacle.
Insert the lead “ B ”
into the “ B ” receptacle.
A
B
A B
#7
#6
#9
#9
#9
#6
#20
#21
#21
#21
#20
#20
#20
#21
#10
#19
6
Step 3: Screw thread bolts #21 into cover plate #7 and side panel #6. Insert gears #20 into storage
shelves #9. Attach cover plate #7 and storage shelves #9 to side panel #6 with gear #20
as shown. Repeat for other side panel #6.
Step 4: Attach the bottom back board #10 to the assembled cabinet with screw #19.