User's Manual

900 Series Installation Instructions
Pit TransPondIT

Model 915-56-21
AT RAMAR LLC PO Box 110127 Research Triangle Park, NC 27709 Toll Free: 1-888-98-RAMAR
© 2002 AT RAMAR LLC. All rights reserved. RAMAR, the AT RAMAR LLC logo, TransPondIT, ConFigIT, HandTrackIT, FastTrackIT and CellTrackIT are trademarks or registered
trademarks of Advanced Technology RAMAR Limited in the United States and/or other countries. All other company names, brand names, and product names are the property of their
respective holder(s). AT RAMAR LLC is an Agent for AT RAMAR Ltd. RAMAR reserves the right to change specifications or other product information without notice. This publication could
include technical inaccuracies or typographical errors. May 2002
Instruction Sheet P/N
Typical Pit Mounting Examples
The Pit TranspondIT is only approved for use in these types
of below grade installations.
Placement of the Pit TranspondIT within the enclosure is
important for satisfactory performance. By following these
examples, optimum results will be achieved.
Example 1: Obround Yokebox
The Yokebox includes three metal castings; a base, upper body
and lid. The units measures 10 5/8” long by 7 1/8” wide by
11” deep.
The Pit Transpondit is mounted in a vertical manner above the
water line with the unit facing the direction of the reader.
Example 2: Square Hand Hole
The Square Hand Hole includes three metal castings; a base,
cylindrical body and square lid. The unit measures 7” wide by 12”
deep. The Pit Transpondit is mounted in the center of the bottom
of the pit with the unit facing the direction of the reader.
Example 3: Round Meter Box
The round meter box includes three metal castings; a base, body
and lid. It measures 10.5“ wide by 13” deep, inside dimensions.
The Pit Transpondit is mounted in a vertical manner at the top of
the pit with the unit facing the direction of the reader.