THE BLUE TIGER STORM MANUAL www.BlueTigerUSA.
® Our mission is to help professional drivers be safe while traveling on the road.
Volume levels are measured in decibels (dB). Exposing your ears to any noise at or above 85 dB can cause gradual hearing loss. According to the Occupational Safety and Health Administration (OSHA), listening to volume levels over 100 dB for more than two hours at a time can lead to hearing loss. http://www.osha.
Table of Contents: 1. Product Overview --------------------------------------------------------------------------------------------------------------------------------------------------- 4 2. Basic Operations ---------------------------------------------------------------------------------------------------------------------------------------------------- 5 3.
1. Product Overview: Package Contents: A. Bluetooth Mono Headset Blue Tiger Storm x1 B. USB-C Charging Cable x 1 C. Mic Windscreen x 1 D. FCC Certified DC (Vehicle Charger) x 1 E.
2. Basic Operations: Button Function Operation In off status, hold MFB for 2 seconds to power on. Blue Tiger Storm will power on and enter pairing Power On mode automatically if it does not have a pairing record . ( it will enter reconnect mode automatically if it has a pairing record) Power Off Enter into Pairing Mode In on status, hold MFB for 3 seconds to power off. In off status, hold MFB for 2 seconds to power on and enter pairing mode.
Multi-function Reject a call Button(MFB) Activate Siri and Google Assistant Volume + Volume Mute the microphone button 6 Press MFB for 1 second to ignore an incoming call. In the paired state, hold MFB for 2 seconds to activate Siri and Google Assistant. Volume Up Press. Next Song Hold for 1 second. Volume Down Press. Previous Song Hold for 1 second. Microphone Mute During a call, press button to mute, press again to cancel.
3. Bluetooth Pairing and Connection: A. In off status, hold MFB for 2 seconds to enter pairing mode. LED will flash Blue and Red. B. On your phone, access the Bluetooth menu and select Add New Device, or search for New Device. C. Select Blue Tiger Storm. D. LED changes to a Blue slow flash once connected, now you can begin using your headset. Pairing 2 Connection Search and connect Pairing: In off status, hold MFB for 2 seconds to enter pairing mode. LED will flash Blue and Red.
4. Connection with Two devices: A. Follow part 3 to connect with first phone, then turn off the Bluetooth function of first phone. B. The headset will enter pairing mode automatically. LED will flash Blue and Red. Turn on the Bluetooth function of second phone to search and connect “Blue Tiger Storm”, LED changes to a Blue slow flash after connected. C. Turn on Bluetooth function of first phone, click to reconnect "Blue Tiger Storm" on Bluetooth lists. Headset is connected with two phones now.
5.
6. Charging: Please charge the Blue Tiger Storm headset at once when the Red LED flashes. Charging time is about 1.5 hours. Solid Red LED will turn off when fully charged. Charge Connections Please connect to the Blue Tiger Storm charging port through the Type-C end of Type-C charging cable, USB end to the charger, can be used as car charger, travel charger, computer USB, etc.
Notes: 1. Please charge your Blue Tiger Storm at least once every 2 months when not in use. 2. Charging when power on, it is normal that the charging indicator will be on at the same time as the Bluetooth indicator. 3. Make sure it's fully charged before the first use. 4. Charge the headset with the USB-C cable provided. 5.
7.
8. Product Specification: Bluetooth Version V5.0, Class II Bluetooth Chipset QCC3020 Frequency Range 2.402GHz-2.480GHz Operation Range Up to 100 feet Bluetooth Protocols HSP, HFP, AVRCP, A2DP CODEC Code AAC, SBC Standby Time Approx. 85 hours Working Time Approx. 32 hours (70% volume) Charging Time Approx. 1.5 hours Battery Capacity 400mAh/3.7V Working Temperature 14 °F to 131°F Headset Net Weight 138.8g (approx 4.9 ounces) Headset Dimension 188.72 x 150.03 x 59.68 mm (7.43 x 5.
9. Attention and Q & A : A. How to reconnect and operate when failed to reconnect? When Blue Tiger Storm is connected with your mobile phone successfully the first time, it will search and reconnect the paired device automatically when powered on, If failed, please pair and connect again. Blue Tiger Storm can be reconnected in 10 minutes, it will power off if over 10 minutes. It will have a tone “Your headset is connected” B.
E. If there are some exceptions such as not being able to power on, abnormal connection and so on? Please try charging to reset: press and hold the MFB, plug in charging cable to charge, this will reset the headset to power off, it can be used normally after powered on. F. Power off automatically. Blue Tiger Storm will power off if it does not connect any devices for over 5 minutes, or battery voltage is less than 3.1V. G. Three-way calling function operation.
Industry Leading Customer Support At Blue Tiger USA, we stand behind our products. We believe that our customer service does not end when we process your payment, but it continues for as long as you use our headset. One-Year Manufacturer’s Warranty (1) Blue Tiger USA warrants that your product will be free from defects in material and workmanship for one year from the date of purchase.
(2) The foregoing limited warranty does not cover equipment failure attributable to accident, improper operation, misuse, abuse, or any cause other than defects in the materials or workmanship of Blue Tiger USA products. (3) Blue Tiger USA obligations under this warranty are limited to repair or replacement (at our option) of any defective part returned to Blue Tiger USA at the customer’s expense.
(4) THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not permit the exclusion of implied warranties and the foregoing exclusions may not apply to you.
FCC Compliance Statement NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
undesired operation of the device. L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
