Operating instructions

1 - 16 System Map: Right View
Quick Start Guide
1
System Map: Right View
4
2
3
1
2
3
4
4
5

CD/DVD Emergency Eject
If you need to manually eject a
CD/DVD (e.g. due to an unex-
pected power interruption) you
may push the end of a straight-
ened paper clip into the emer-
gency eject hole. Do not use a
sharpened pencil or similar ob-
ject that may break and become
lodged in the hole.
Figure 1 - 9 - Right View
1. Optical Device Drive Bay
(for CD/DVD Device - see
page 2 - 3)
2. Headphone-Out Jack
3. Microphone-In Jack
4. USB 2.0 Port
5. Stand

Changing DVD Regional Codes
Go to the Control Panel and double-click
Device Manager (Hardware and Sound),
then click the + next to DVD/CD-ROM
drives. Double-click on the DVD-ROM de-
vice to bring up the Properties dialog box,
and select the DVD Region (tab) to bring up
the control panel to allow you to adjust the
regional code. You can select your module’s
region code 5 times (see “DVD Region
Note” on page 2 - 5).

Media Warning
Don’t try to remove the CD/DVD while the
system is accessing it. This may cause the
system to “crash”.
4