Operating instructions

Table Of Contents
HDMI-In Port 1 - 15
Quick Start Guide
1
HDMI-In Port in Sleep or Hibernate Modes
Note that if the computer is in Sleep or Hibernate modes, and no HDMI cable is plugged-in, then the procedure
for plugging-in the HDMI cable and using the system as a display device is as follows:
1. The System is in Sleep or Hibernate mode and no HDMI cable is plugged-in.
2. The battery/HDMI icon will be off.
3. Plug-in the HDMI cable.
4. The battery/HDMI icon will turn green for about 8 seconds and then turn off again.
5. Press the Mode Toggle Button .
6. The battery/HDMI icon will turn green again.
7. After a few seconds the system will display the image from the external HDMI source.