Operating instructions

Quick Start Guide
Tilting the LCD Screen 1 - 9
1
2. Apply pressure with one hand at the top (at point ) of the computer (while holding on to the side with the other
hand) to carefully push the LCD screen down in order to tilt it to the appropriate viewing angle (up to 50
degrees from the vertical position).
3. Use one hand at the top of the computer (while holding on to the side with the other hand) to move the computer
back to the original position.
Figure 1 - 5 - LCD Screen Tilt
3
3
Apply pressure from the top of the
screen to adjust the stand outwards
(up to 50° from the vertical position).

DVD Operation
Note that although the
computer may be tilted
up to an angle of 50 de-
grees from the vertical
position, the DVD-ROM
drive will only work (i.e
continue to spin and
read DVDs) up until an
angle of around 35 de-
grees from the vertical
position.
If you have any prob-
lems with the system
reading DVDs, adjust
the tilt angle accordingly.
50°
50°