INSTALLATION AND OPERATION MANUAL ELECTRIC GRIDDLE RANGES EP506 E P5 6 For use in GB & IE 230380-5
MANUFACTURED BY Moffat Limited PO Box 10001 Christchurch New Zealand Ph: (03) 389 1007 Fax: (03) 389 1276 WORLD-WIDE BRANCHES UNITED KINGDOM Blue Seal 67 Gravelly Business Park Gravelly Park Birmingham West Midlands B24 8TQ Ph: (121) 327 5575 Fax: (121) 327 9711 UNITED STATES Moffat Inc 3765 Champion Blvd Winston-Salem North Carolina 27115 Ph: (336) 661 0257 Fax: (336) 661 9546 CANADA Serve Canada 22 Ashwarren Road Downview Ontario M3J1Z5 Toll Free:800 263 1455 Ph: (416) 631 0601 Fax: (416) 631 0315 info@se
Contents Blue Seal Electric Griddle EP506 EP56 Electric Griddle, Static Oven Range Electric Griddle, Convection Oven Range 900mm. 900mm. Introduction ............................................................................................. 2 Specifications ........................................................................................... 3 Model Numbers Covered in this Specification General Electrical Supply Requirements Electrical Connection Dimensions Installation .........................
Introduction We are confident that you will be delighted with your BLUE SEAL Electric Griddle - Static / Convection Oven Ranges and they will become a most valued appliance in your commercial kitchen. To ensure you receive the utmost benefit from your new BLUE SEAL appliance, there are two important things you can do. Firstly: Please read the instruction book carefully and follow the directions given. The time taken will be well spent.
Specifications Model Numbers Covered in this Specification EP506 Electric Griddle Static Oven Range 900mm wide. EP56 Electric Griddle Convection Oven Range 900mm wide. General A commercial heavy duty, 900mm wide, Electric Griddle, Electric Oven Range designed for modular kitchens and constructed in an easy clean stainless steel external finish. The griddle elements are constructed using stainless steel sheathed heating elements with dual thermostatic control zones.
Dimensions Dimensions EP506 / EP56 4
Installation Installation Requirements NOTE: • It is most important that this appliance is installed correctly and that operation is correct before use. Installation shall comply with local electrical and health and safety requirements. • This appliance shall be installed with sufficient ventilation to prevent the occurrence of unacceptable concentrations of health harmful substances in the room, the appliance is installed in.
Installation Assembly C AUTIO N : • This appliance is for professional use and is only to be used by suitably qualified / trained persons. • Only qualified service persons are allowed to carry out installation and servicing of this appliance. All Models All models come pre-assembled. NOTE: This appliance is fitted with adjustable feet / castors to enable the unit to be positioned securely and level. This should be carried out on completion of the electrical connection.
Installation Commissioning 1. Before leaving the new installation; a. Check the following functions in accordance with the operating instructions specified in the 'Operation' section of this manual. • Check the current draw and loading for the equipment. Refer to the 'Specification' section for the correct electrical requirements. • Check that all the connections are correct and that all cover panels have been re-fitted.
Operation Operation Guide C AUTIO N : • This appliance is for professional use and is only to be used by suitably qualified / trained persons. • Only qualified service persons are allowed to carry out installation and servicing of this appliance. 1. 2. Blue Seal Electric Griddle / Electric Static Convection Oven Ranges have been designed to provide simplicity of operation and 100% safety protection.
Operation Griddle 1. 2. Turn 'ON' the power at the mains supply, the clear neon will illuminate. Turn the thermostat control knob to the desired temperature. When the amber neon goes out, the desired temperature has been reached and the griddle is ready for use. NOTE: 3. 4. Turning the control to a higher setting than required will not shorten the heat up time. To turn 'OFF' the griddle, turn the thermostat control knob to the lowest setting and turn 'OFF' the mains power to the griddle.
Cleaning and Maintenance C AUTIO N : Always turn off the electrical supply at the mains before cleaning. This appliance is not water proof. Do Not use water jet spray to clean interior or exterior of this appliance. General Clean the griddle regularly. A clean appliance looks better, will last longer and will perform better. Carbonised grease on the surface or on the griddle plate will hinder the transfer of heat from the cooking surface to the food. This will result in loss of cooking efficiency.
Cleaning and Maintenance Daily Cleaning 1. 2. 3. 4. 5. The grease drawer should be checked and emptied frequently to prevent overflow and spillage. Remove the grease drawer while still warm so that the grease is in a liquid state. Empty any grease from the drawer and wash thoroughly in the same manner as any cooking utensil. Clean the Control Panel with a damp cloth lightly moistened with a solution of mild detergent and water.
Cleaning and Maintenance a. Remove and clean the grease collection drawer frequently to prevent over spills. b. Clean the griddle surface thoroughly with the supplied scraper tool. c. Allow the plate to cool, then clean the plate with a scrubbing brush, a mild non-abrasive detergent and water. d. Occasionally bleach the plate with vinegar when cold. e. Dry the griddle thoroughly with a dry cloth and polish with a soft dry cloth. f.
Fault Finding This section provides an easy reference guide to the more common problems that may occur during the operation of your equipment. The fault finding guide in this section is intended to help you correct, or at least accurately diagnose problems with your equipment. Although this section covers the most common problems reported, you may encounter a problem not covered in this section.
Circuit Schematics Griddle Wiring Schematic (EP506 / EP56) REAR SUPPLY ENTRY 12 10 10 9 10 9 EARTH STUD M6 9 15 11 15 8 8 7 8 7 6 8 7 7 6 EARTH STUD M6 GRIDDLE PLATE 16 7 7 7 7 6 3 2 32 31 22 21 12 32 OVERTEMP THERMOSTAT 229353 1 1 2 THERMOSTAT 229146 31 21 11 13 4 P4 3 P3 2 P2 32 22 12 31 21 11 14 1 1 10 10 22 16 SWITCH 1 229145 P1 NEON AMBER 227963 12 THERMOSTAT 229146 4 OVERTEMP THERMOSTAT 229353 1 NEON GREEN 227962 12 32 2 31 21 11 13 4 P4 3
Circuit Schematics Static Oven Wiring Schematic (EP506) 15
Circuit Schematics Convection Oven Wiring Schematic (EP56) 16
Replacement Parts List Replacement Parts List IMPORTANT: Only genuine authorized replacement parts should be used for the servicing and repair of this appliance. The instructions supplied with the parts should be followed when replacing components. For further information and servicing instructions, contact your nearest authorized service branch (contact details are as shown on the reverse of the front cover of this manual).
Replacement Parts List General 227850 229674 227892 227893 227896 Leg 150mm (Adjustable). Rear Roller Assy. Oven Side Rack LH. Oven Side Rack RH. Oven Rack. Accessories 228566 228567 228568 228799 Griddle Scraper Tool. Smooth Plate Scraper Blades Ribbed Plate Scraper Blade 900mm Plinth Kit. 18 (Pack of 5 blades). (Individual Blade).