Specifications

3
Model Numbers Covered in this Specification
E91 Electric Salamander (Branding Plate Optional)
E91B Electric Salamander with Branding Plate.
General
A commercial heavy duty, wall or bench mounted electric fired infra-red grilling Salamander for a wide
range of foods.
Blue Seal Salamanders feature independently controlled heat zones for left and right side of the cooking
area.
Two efficient high speed infrared elements in the ceiling of the cavity are independently
operated with the left and right hand side controls of the appliance.
Each element has LO,MED, HI settings to provide full cooking flexibility.
E91 Rack supports have 4 fixed height positions offering flat and angled rack positioning.
Rack can be changed from flat to angled position by partial removal of rack.
Rack height must be fully removed for repositioning of rack height setting.
Branding Plate is available as an accessory item. Refer to Replacement Parts List.
E91B Rack supports have 4 fixed height positions offering flat and angled rack positioning.
Rack can be changed from flat to angled position by partial removal of rack.
Rack height must be fully removed for repositioning of rack height setting.
Supplied with Branding Plate.
Branding Plates are available as an accessory item. The cast Aluminium branding plates provide a deep
grooved / ribbed surface and can be used with this racking system.
The Branding Plates are fitted onto the standard wire rack allowing ease of change as required between
menus.
Blue Seal Salamanders come standard with a trough tray incorporating a front grease trough for direct
collection of cooking grease from Branding Plate operation.
The tray is easily removed (slide out) for cleaning and to provide easy cleaning access to rear and sides
of cooking area.
Electrical Supply Requirements
220-240 Volt, 50/60 Hz, 1 P+N+E, 6.0kW @ 240V, 25A.
Specifications