Specifications

11
Assembly
Bench Mount (B) Models
1. Check that all the feet are fitted.
2. Adjust the four feet to make the hob steady and level.
Optional Accessories (Refer to Replacement Parts List)
• Plinth Kit. For installation details, refer to the instructions supplied with each kit.
Leg Stand (LS) Models Only
1. Lower the appliance onto its rear face.
2. Attach the four Cooktop legs to the leg
mount points on the underside of the
Cooktop unit.
3. Secure each leg hand tight.
4. Align the 4 round holes in the corners of
the base tray with the 4 Cooktop legs
already fitted. (Ensure that the base
tray is orientated with the sloping edge
of the base tray facing the front of the
appliance).
5. Slot the base tray onto the 4 Cooktop
legs and push fully home.
6. Secure the base tray to the front cooktop
legs by screwing the adjustable feet
supplied, into the base of the front
cooktop legs. Secure each adjustable
foot, hand tight.
7. Fit the rear rollers to the rear leg ring
plates and secure using the locating bolts
supplied and tighten bolts using a 10mm
spanner.
8. Lift the Cooktop back onto its legs.
NOTE: This appliance is fitted with adjustable feet / rear rollers to enable the appliance to be
positioned securely and level. This should be carried out on completion of the electrical
connection. Refer to the ‘Electrical Connection’ section.
All Other Models
All other models come pre-assembled.
Installation
WARNING:
TO PREVENT EQUIPMENT DAMAGE AND RISK OF INJURY, 'SECURELY RESTRAIN' THE ELEMENTS AND GRIDDLE
PLATE MODULES AND REMOVE ALL OTHER REMOVABLE ITEMS PRIOR TO FITTING THE LEG STAND.
C AUTION :
• This appliance is for professional use and is to be used by qualified
persons only.
• Only qualified service persons are allowed to carry out installation and
servicing of this appliance.
Fig 1
Sloping Edge
of Base Tray
Rear Roller
Base Tray
Cooktop
Legs
Leg Mount
Points
Cooktop