User Manual

The Surface Mount System panel enclosure should be installed by a
certied marine electrician.
Hazardous voltage. Improper handling can cause death or serious injury.
Turn off any shore sources and disconnect shore cord(s). Lock out other
AC power sources before beginning electrical installation.
Marine Electrical Prod ucts
SMS Surface Mount System
PN 3113 / PN 3116 / PN 3117 / PN 3118 / PN 3119 / PN 3120
Meets ABYC E11 when used with an ELCI Main circuit breaker and
mounted within 10 feet of the shore power inlet
Blue Sea Systems Inc. p 360.738.8230
425 Sequoia Drive f 360.734.4195
Bellingham, WA 98226 USA [e-mail]
www.bluesea.com
980009910 Rev.004
DANGER
WARNING
• Models available with ELCI Main circuit breakers for 120V 30A, 120V 50A,
and 120/240V 50A
• Blank apertures for custom breaker loading
• Glass lled polycarbonate base
• Clear cover allows easy view of circuit breaker status
• Overlapping cover for strength and increased gasket protection
• Oversized, formed in place seamless PUR gasket
• Easily removable stainless steel hinge pin for unobstructed installation
• Stainless steel latch secures cover without penetrating the enclosure
• Blank circuit positions accommodate Carling Technologies™
A and C Series Flat or Raised Rocker and ELCI Main circuit breakers
• Stainless steel mounting hardware included
• Includes waterproof glands (3116, 3117, 3118, 3119, 3120)
• LED lights for back lighting and ON indication (3116, 3117, 3118, 3119, 3120)
GUARANTEE: Blue Sea Systems stands behind its products for as long
as you own them. Find detailed information at www.bluesea.com/about.
For customer service, call 800-222-7617.
Box Specications
Temperature Range −40°C to +85°C
Cover Screws and Hardware 10-32, stainless steel
Mounting Hardware ¼" diameter, #12, (6 mm)
Regulatory
IP66—Protected against powerful water jets
Flammability rating—Per UL 508
Toxicity— Non-toxic, halogen free, RoHS compliant
UL Listed and NEMA 4X rated, NEMA Type 4, 4X, 6, 6P, 12, and 13
Specications
Specications subject to change. See www.bluesea.com for additional information and specications
Enclosure Dimensions
4.00"
101.6mm
MOUNTING HARDWARE
CLEARANCE FOR:
Ø
1/4", #12, OR 6mm
6.65"
168.8mm
7.35"
186.8mm
4.96"
126.1mm
7.65"
194.2mm
8.13"
206.4mm
PN 3116
.63"
15.9mm
1.25"
31.8mm
Ø.49" THRU
12.5mm
Ø.89" THRU
22.5mm
Ø.80"
20.3mm
CLEARANCE
FOR LOCK NUT
Ø1.30"
33mm
CLEARANCE
FOR LOCK NUT
PG 7
CABLE
GLAND
PG 16
CABLE
GLAND
2.80"
71.1mm
1.40"
35.6mm
2X 2.08"
52.7mm
3X 1.00"
25.4mm
PN 3118, 3119, 3120
Ø.49" THRU
12.5mm
Ø1.47" THRU
37.3mm
Ø.80"
20.3mm
CLEARANCE
FOR LOCK NUT
Ø2.00"
50.8mm
CLEARANCE
FOR LOCK NUT
PG 29
CABLE
GLAND
PG 7
CABLE
GLAND
2.25"
57.2mm
1.13"
28.6mm
.60"
15.2mm
2.40"
61mm
2X
1.50"
38.1mm
1.65"
42mm
2X Ø.49"
12.5mm THRU
FOR PG 7
CABLE GLAND
2X Ø.89"
22.5mm THRU
FOR PG 16
CABLE GLAND
.43"
11mm
1.38"
35mm
Ø.80"
20.3mm
CLEARANCE
FOR LOCK NUT
Ø1.30"
33mm
CLEARANCE
FOR LOCK NUT
2.27"
57.7mm
1.38"
35mm
1.65"
42mm
.43"
11mm
2X 2.08"
52.7mm
2X 1.00"
25.4mm
.80"
20.4mm
PN 3117
Drill Guides