User Guide

You’re almost done, just a few ﬁnal steps.

Connect to computer

Cable modem Ethernet cablePower cord

Coax cable(s) Plastic wrenchSplitter

(optional)

Connect the coax cable – one end to an active cable wall

outlet; the other end to the back of the cable modem.

Use the plastic wrench to tighten both coax connections.

Plug your cable modem in to a power outlet using the

provided power cord.

Wait 5 minutes or until there is a solid green online light

on the front of the modem.

Your Blue Ridge cable modem kit should include:

Follow these instructions to connect your cable modem:

Connect cable modem

Use the provided Ethernet cable to connect your modem

to a computer. For a wireless connection, follow the

HomeFi Quick Start Guide instructions to setup your eero

unit(s) or use the Ethernet cable to connect your personal

router device.

Test your internet connection.

Before you get started

You're all set! Now you can quickly manage

your account and check data usage online

using your My Blue Ridge account.

PAGE 1
Before you get started Connect cable modem Connect to computer Your Blue Ridge cable modem kit should include: Follow these instructions to connect your cable modem: You’re almost done, just a few ﬁnal steps. Connect the coax cable – one end to an active cable wall outlet; the other end to the back of the cable modem. Use the plastic wrench to tighten both coax connections. Plug your cable modem in to a power outlet using the provided power cord.
PAGE 2
Using a splitter Troubleshooting Tips If you need to connect both cable modem and BRC TV set top using the same coax cable outlet, follow these steps: If the modem online light fails to display as solid green: Connect coax cable – one end to the wall cable outlet; the other end to the splitter’s IN port. Connect additional coax cables to the splitter OUT ports. Connect one coax cable to the cable modem; the other to the BRC set top. Cable outlet may not be active.