Mosquito Exterminator Owner's Manual

Page 5

Model#CPSV003589

Page 5

1.888.753.7137

Page 6

To complete assembly you will need:

• 1 precision-filled standard grill LP gas tank (20#)

with external valve threads

• 4 oz. leak check solution - mix 1 part dishwashing

soap with 3 parts water

1. Assemble Cart Frame

• Slide front section of cart frame into rear section

of frame.

• Attach with bolts, washers and nuts as shown.

• Hand tighten securely.

2. Attach Engine to Post

• Place engine onto post.

• Press down until the snaps engage.

• Slide WaveDrawer

™

into engine.

• Position FineTune

ring and lure in place.

3. LP Gas Tank

• Place full LP gas tank on cart.

• Connect gas line to tank by turning knob clockwise

until it stops.

• Turn tank ON and test for leaks:

• Spoon leak check solution where knob and tank

valve connect.

• If any bubbles appear turn tank OFF, reconnect

and re-test.

• If no bubbles appear after one minute turn tank

OFF, wipe away solution

and proceed.

• Wrap cover around tank and attach to frame.

4. Attach Rain Cover

• Place rain cover over engine and tank.

• Secure in place by twisting FineTune

lock

clockwise until it stops.

Quick & Easy Assembly

Tip: to locate a retailer in your neighborhood

that provides precision-filled tanks,

visit www.bluerhino.com or call toll free

1.800.258.7466.