Owner`s manual

Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.
®
Owner’s manual: model 235000 outdoor patio heater
9
Step 4 – Insert Gas Line through Platform/Attach Shroud Cover
Insert gas line up through large hole in platform from underneath between center and
left leg as shown in illustration.
Slide shroud cover over gas line, then over platform/leg assembly until bottom of
shroud rests on base.
Step 5 – Attach Small & Medium Dome to Engine
Set engine assembly on its top as shown at left.
Carefully slide medium sized dome over engine assembly, and line up slots in dome
with fins on dome brackets.
Line up holes in dome with threaded holes in bracket and 3 small bolts (C) into each
hole, finger tightening at first.
After three bolts are in place, tighten with 7/16” wrench.
Repeat process for small dome.