User manual

Operations Settings

7.3 Settings

This main menu option allows you to select the language for the MICROSCAN display and how

units of measurement display in the data lists. English is the default language and Metric is the

default measurement units.

z To change the language setting:

1. Scroll to highlight Settings on the main menu and press Y to select.

A sub-menu of language options displays.

2. Highlight the desired language and press Y to select.

Select Units from the main menu to choose between US Standard or Metric units of measure for

certain data parameters.

7.4 Global OBD-2/EOBD Help

This main menu option allows you to access information designed to assist you in making a quick

and accurate diagnosis. Selecting opens a menu with two options:

• Code Tips—provides specific code information that includes setting conditions, test tips, and

probable causes.

• Mode Definitions—provides detailed descriptions of the OBD operating modes and

procedures for performing tests and clearing monitors.

Code tips are arranged by groups and you need to navigate through a series of sub-menus to get

to the desired code. Most tips contain more information than will fit on a single screen, scroll to

view the entire tip.

Figure 7-9

Sample code tip

Selecting Mode Definitions opens a sub-menu of modes. Highlight the desired mode and press Y

to open the definition. scroll down as needed to view the entire definition.

Table 7-3

Units of measurement—defaults and options

Measurement Metric US Standard

Temperature degrees Celsius (°C) degrees Fahrenheit (°F)

Air Pressure (including

manifold pressure)

kilopascal (kPa) inches of mercury (“Hg)

Pressures (all others) kilopascal (kPa) pounds per square inch (psi)

Vehicle Speed kilometers per hour (kph) miles per hour (mph)

GLOBAL OBD-2/EOBD HELP

P0108:

MAP/BARO Circuit High Input

Possible Causes:

Short to Power Circuit;

Faulty BARO Sensor;

Faulty ECM;