User manual

Navigation Data Screens

5.4.1 Text View

Text view screens include a parameter description and a parameter value. The units of the value,

such as V for volts, mS for milliseconds, and % for percent, are shown in parenthesis after the

parameter description. A lock icon appears to the right of the value if the parameter has been

locked to prevent it from scrolling. Up and down scroll arrows appear to the right of the values

whenever additional parameters are above and below those shown on the current screen.

NOTE:

i Parameters display in the order in which they are transmitted by the ECM. Therefore, the display

order can vary considerably depending upon make, model, and year.

1— Parameter description

2— Parameter value unit

3— Parameter value

4— Lock icon

5— Scroll arrows

Figure 5-7

Sample text view screen

Up to three parameters can be locked in place to allow side-by-side comparison while in the text

view. Use the Lock/Unlock function on the Exit menu to lock and release parameters. When a

parameter is locked, it is moved to the top of the data list, when it is released it returns to its original

position in the data list.

An abbreviated, or short version, of the parameter description is used so that it fits on one line.

Highlight a parameter and press Y to open a pop-up with the complete long parameter name.

Figure 5-8

Sample long parameter name pop-up

RPM(1/min.) 1800

TPS(%) 50.2

TPS(V) 2.7

IAT(°C) 88

ECT(°C) 104

A/F Rate(g/s) 11.52

LIVE DATA

12 34