User manual

32
Navigation Data Screens
The up (b) and down (d) buttons scroll the graphics right and left respectively when more than
three options are available. The graphics scroll in a continuous loop so there is no need to reverse
direction while scrolling.
z To use the Exit menu:
1. Press the N button to open the menu.
Figure 5-6
Sample Exit menu
2. Press the up (b) button to scroll left or the down (d) button to scroll right until the desired
option is in the center position.
3. Press the Y button to activate the selected function.
5.4 Data Screens
Data screens display serial datastream parameter values, which represent input and output
information that the ECM is receiving and transmitting to the various actuators, sensors, and
switches in the electronic control system.
Vehicle datastream information can be displayed in two formats; text view and graph view. Use the
Text/Graph function on the Exit menu to switch between viewing modes.
Pause/Play
Suspends data collection when viewing
live data to allow closer examination,
and restarts data collection when
viewing paused data.
Clear ECM Memory
Erases all data, stored codes, pending
codes, and freeze frame information,
from the vehicle ECM.
Custom Data List
Allows you to select which data
parameters display on the data list.
Table 5-1 Exit menu graphic definitions (sheet 2 of 2)
Name Graphic Description
GLOBAL OBD-2/EOBD
Current Data
Freeze Frame Data
Confirmed Codes
Clear Codes
O2 Monitors
Non-Cont. Monitors