User manual

11
Getting Started Powering On the Unit
3. Plug the large end of the Lighter Power Cable into the socket of the Battery Power Cable.
4. Connect the clamps of the Battery Power Cable to the vehicle battery. Be sure to observe
correct polarity when connecting to the vehicle battery.
1— Lighter Power Cable, large end
2— Lighter Power Cable, small end
3— Vehicle test adapter
Figure 3-2
Auxiliary power cable connections
3.4 Powering On the Unit
When vehicle power is not available, you can manually power on your MICROSCAN unit
using the internal 9-volt battery. To manually power the tool, Press the Power button on the
front of the unit. Press the Power button on the front of the unit.
3.5 Selecting a Language
English is the default language selection in the scan tool software. However, you can change
the language setting if desired.
z To change the language setting:
1. Select Settings from the main menu.
2. Select Languages from the settings menu.
3. Scroll to highlight the desired language and press Y.
4. Press N to exit.
The language remains as selected after powering down.
1
2
3