User manual

6
Introduction Control Buttons
2.3 Control Buttons
The MICROSCAN has the following control buttons; N (back), Y (accept), b (Up), d (Down),
and Power (Figure 2-2).
2.3.1 Y (Accept) Button
The Y button is used to do the following:
• To select the item that you highlighted using the direction buttons.
• To answer “Yes” when a Yes or No choice is given.
2.3.2 N (Back) Button
The N button is used to do the following:
• To open the Exit Menu
• To exit a menu or program.
• To close an open list and return to the previous menu.
• To answer “No” when a Yes or No choice is given.
• To return to the main menu.
2.3.3 Power Button
The Power button powers up the tool, and turns it off.
2.3.4 Up Button
The Up button is used to do the following:
• Move the highlight or cursor up when the screen arrows are vertically aligned.
• Move the highlight or cursor right when the screen arrows are horizontally aligned.
2.3.5 Down Button
The Down button is used to do the following:
• Move the highlight or cursor down when the screen arrows are vertically aligned.
• Move the highlight or cursor left when the screen arrows are horizontally aligned.