Owners manual

BX3832
2011 Volkswagen Tiguan
Installation Instructions
405-0219 Page 4 of 8 7/25/11
3. Remove the wheel well trim from the driver’s
side front wheel. To do this, pinch the trim
clips from the inside of the wheel well, after
pulling back the wheel well. Do this on both
sides. Set all parts aside to be reinstalled
later.
3
4D
5
4. Use a T25 Torx wrench and remove the six
(6) bolts from the fascia-belly pan seam
underneath the car. Set all bolts aside to be
reinstalled later.
6
6. Using a utility knife, cut a square from the
black plastic radiator cover. Trace the bottom
edge and the back edge of the bumper for
two (2) sides of the cut (white arrows), and
to the back and bottom of the plastic for the
other two (2) sides (gray arrows). Do this on
both sides of the vehicle. On the driver’s side,
unplug electrical connection.
5. To remove the fascia, carefully lift up and out
from the vehicle on the edge near the driver’s
side front wheel. Do this on both sides. Set
the fascia aside to be reinstalled later.




4C
4A 4B















