Owners manual

2008 VW EOS

Installation Instructions

BX3828

24. Be careful not to cut the nut for the washer

reservoir on the inside of the frame on the

passenger side.

23. On the frame rail end, cut with a reciprocating saw

even with the inside of the frame and down. Be

sure not to cut into the frame. Do this on both

sides. Photo shows driver’s side.

Using a good quality paint, spray cut edges

of frame to prevent rusting.

25. On the back side of the bumper with the right side

up, cut straight across the opening and straight

down following the inside of the extension, then

straight across the bottom. Be sure not to cut into

the frame. Do this on both sides. Driver’s side

shown.

26. Use a T-25 Torx socket to remove the three bolts

holding the headlight lower bracket on both sides.

Set the bracket and bolts aside to reinstall later.

Page 9 of 14 405-0006 Rerv. C 9/14/10