Owners manual

15. On the backside of the frame end just below the

frame rail on the passenger side, use an 8MM

socket to remove the two hex nuts from the horn

bracket. Set aside to reinstall later.

2008 VW EOS

Installation Instructions

BX3828

Page 7 of 14 405-0006 Rev. C 9/14/10

16. Use a 16MM socket to remove the two metric bolts

below the headlights and the two on the bottom.

Just under the bumper, press the clip down and

pull the air dam off. Do this on both sides. Set

aside to reinstall later.

17. Use the T-30 Torx Socket to remove three bolts.

Do this on both sides. Set aside for reinstallation

later.

18. In the center of the radiator, use a T-30 Torx

to remove the two screws. Set aside for later

reinstallation.