Owners manual

2008 VW EOS

Installation Instructions

BX3828

7. Just forward the front tire in the wheel well, remove

two T-25 Torx screws. Set screws aside to reinstall

later.

8. Pull the wheel well cover back and remove two

T-25 Torx screws. Set screws aside to reinstall

later. Also pull the slide bar back until it clicks to

release the clips holding the fascia. Do this on

both sides.

Page 5 of 14 405-0006 Rev. C 9/14/10

9. Under the fascia are nine Torx bolts that need to be

removed with a T-25 Torx socket. Remove bolts

and set aside for later reinstallation.

10A

10. On the back of the side marker lights, press the

clip down to release. On the front, slide the light in

and back, the front comes out. Pull the light out,

then push the light in the opening and out the back.

On the back side of the fascia on the driver’s side

only, detach the marker light from the clip. Unplug

the running lights. Pull fascia corners out to the

side, pull fascia forward to remove. Set fascia aside

carryover to reinstall later.

10B

10C