Owners manual

BX3827
2000-05 VW Jetta TDI
Installation Instructions
292-3032 Rev. B Page 8 of 9 4/8/10
Be sure that ALL electrical connections
are plugged in properly and functioning
BEFORE Installing the fascia.
21

21. On the passenger side, reattach the air dam and
trim the cover to t. Reattach the bumper.
19. Reconnect wire and position the horn bracket on
the driver’s side just behind baseplate, drill the
hole using the 13/32” drill bit. Insert 1-1/4” bolt
and 3/8” lock washer with 1” nut plate. Attach
baseplate safety cables (grey arrow). Position the
cables around a solid piece of the frame.
20. Reattach the turbo cooler.
19



22. Hold the fascia in place. Mark where the
attachment tab receivers and convenience links
will come through and trim as needed. Reinstall
fascia, lower & upper grille panels and reattach
the hood latch.
22


Install the tow bar and safety cables according
to the instructions included in their packages.
Do not substitute other devices if the tow bar
pin and clip are lost.
DEALER OR INSTALLER: BE CERTAIN
THE USER RECEIVES THE INSTRUCTION
SHEETS.