Owners manual
BX3827
2000-05 VW Jetta TDI
Installation Instructions
292-3032 Rev. B Page 6 of 9 4/8/10
12
12. On the passenger side, pop the two (2) tabs
on the top of the turbo cooler air dam. Slide
the air dam down to release the lower clip
(see inset). Trim before reinstallation.
13. Tip the baseplate up and slide in over the hose
on the passenger’s side. Clamp the baseplate as
high as possible until it hits the frame and clear
forward. The nut plates will be inserted through
the opening in the frame indicated with the gray
arrow later.
14. Using the baseplate as a template, use a
13/32” drill bit to drill all the holes. On the
driver’s side, bend the metal plate back before
drilling, return plate to its original position
when nished.
14
11
11. In the center of the metal bumper are two (2) torx
bolts that need to be removed using a 25 Torx
socket. Remove bolts and bumper, set aside to
reinstall later.
13
When using power drills be aware
of the dangers of torque and drill
bit length.