Owners manual

BX3786
2011-12 Toyota 4 Runner SR5
Installation Instructions
405-0216 Rev. B Page 8 of 9 1/26/12
18. Attach the permanent baseplate safety
cables to the provided convenience link on
the baseplate (white arrow).The photo above
shows the recommended installation of the
permanent baseplate safety cables to frame
of the vehicle (gray arrow). If the vehicle
has additional options, not shown above,
which interfere with mounting the permanent
baseplate safety cables, secure the cable to a
solid piece of the vehicle’s frame as described
in the instructions included with the permanent
baseplate safety cables.
Be sure that ALL electrical connections
are plugged in properly and functioning
BEFORE installing the fascia.
18
19. Optional: To install a breakaway switch, use
a #10-16 x 1” self drilling screwand attach
the breakaway mount to the front bumper as
shown.
19
21. Reinstall the grill and fascia using the existing
hardware. To reinstall the black belly pan, you
have to trim the outer edges, as shown above.
Tighten all bolts with Loctite Red.
21
20. Allign the fascia to its original position and
trim the opening for the attachment tabs with
a utility knife (white arrows). Do this to both
sides of the vehicle. Optional: Attach the
electrical bracket to the center of the fascia
(gray arrow).
20





