Owners manual

BX3783
2007-12 Toyota Yaris Liftback
Installation Instructions
405-0046 Rev G Page 5 of 12 9/10/12
6. On the driver’s side, remove the temperature
sensor (white arrow). Unhook the plastic
guard under the bumper (gray arrow) on both
sides and set aside. Set sensor aside for
later reinstallation.
4. Pull fascia corners out to the side of the
vehicle on both sides, then forward. Set
fascia aside carefully for later reinstallation.
5. On the back side of the bumper, unhook
ve (5) hose clamps by squeezing together.
2007-11 Models Only
5
4





6



7. Using a 14MM socket, remove three (3) bolts
(white arrows) from the bumper core. Using a
10MM socket, remove two (2) hex nuts (grey
arrows). Do this on both sides. Set bumper,
bolts and nuts aside for later reinstallation.
7




