Owners manual

BX3783
2007-12 Toyota Yaris Liftback
Installation Instructions
405-0046 Rev G Page 2 of 12 9/10/12
Instruction Notes: The fascia, windshield washer uid reservoir, temperature sensor, frame
extension, and passenger headlight are removed and reinstalled for the baseplate installation. Some
drilling and trimming is required.
Place all components that are removed on a at, sturdy surface. All items will be reinstalled unless
otherwise noted after the baseplate is installed.
The dimensional variations between otherwise identical vehicles can be considerable. While the
baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to
compensate for vehicle manufacturer’s tolerances.
The BX8869 Tail Light Wiring Kit is recommended for 2007-11 Models.
The BX8848 Tail Light Wiring Kit is recommended for 2012 Models only.
NOTICE
• Handling of some cosmetic parts when installing this product may require the use of protective
covers, rags, specialty tools, etc. to prevent damage.
• When using power drills be aware of the dangers of torque and drill bit length.
• Be sure that ALL electrical connections are plugged in properly and functioning before
reinstalling the fascia.
• Do not use the towed vehicle for storing luggage, equipment, etc. This may cause you to
exceed the towing capacity of the tow bar, baseplate and its accessories.
• Be sure to use Loctite
®
Red on all bolts before tightening. Tighten all bolts according to the
torque chart provided.
• Due to design of the removable tabs, the RangeFinderII tow bar can not be used. Adapters,
except the BX8833 and BX88151, can not be used with this baseplate.