Owners manual

BX3782
2001-05 Toyota RAV4
Installation Instructions
405-0030 Page 5 of 9 10/9/08
7. There are four hex bolts on the metal bumper
that require a 12MM socket to remove.
7
8
9
8. Drill the existing hole out to 1/2”. Do this on
both sides.
10
10. Using a12MM socket, remove both horns.
They will be remounted elsewhere.
9. On the back side of the bumper, pull the four
clips out. Set the horn’s electrical cables aside
to clear the area for baseplate installation and
to be reinstalled later.






